If you’re seeking the ultimate breathable impregnating sealer for protecting natural stone, tiles, masonry, pavers, concrete and grout, you’ll be excited to learn about META CRÈME™ from Dry-Treat…and that Chemical Concepts now carries it.

META CRÈME is ideal for indoor / outdoor use on kitchens, bathrooms, entertainment areas, pool surrounds, patios, countertops, floors, walls, building facades, and for public / commercial areas

Here are some of the primary features and benefits made available by META CRÈME:

•   Superior stain protection.
•   Super penetration creates large water and oil-repelling barrier, which provides protection against stains and many serious problems, including efflorescence, picture framing, spalling and freeze-thaw damage.
•   Low odor, non-drip white to straw colored cream. Plus, ultra low VOC, fulfills strictest LEEDS requirements.
•   Retains a natural color and finish of the surface.
•   Easy, one coat application.
•   Makes cleaning easier and dries quickly even after heavy rain to keeps surface looking new for longer;
•   Breathable – water vapor escapes freely, helping to avoid harmful moisture buildup inside the treated material.
•   Treated areas are food contact safe.
•   Alkali resistant – won’t break down in contact with cement based materials.
•   Can seal hairline cracks up to 0.3 mm (0.012 in.).
•   Will maintain a superior gloss level when used to treat highly polished surfaces.

How Does It Work?

Upon contact with the surface, META CRÈME gets to work immediately. Self-assembling components enter through the tiny capillaries present in all porous building materials to deeply connect on a microscopic level to the subsurface. The treatment becomes permanently part of the material itself…meaning that damaging liquids such as oil and water-borne salts are repelled.

The total application rate is approximately one quart per 30 to 100 sq. feet (1 litre per three to 10 sq.m.) depending on absorption.

This product is available from Chemical Concepts in a 1 Quart (946 mL) recyclable soft pack.

Guidelines for Applying META CRÈME to Various Surface Types

ON DENSE / POLISHED SURFACES
For extra penetration META CRÈME™ may be left to penetrate for up to 4 hours on smaller polished surfaces such as countertops.

ON SMOOTH SURFACES
Once META CRÈME has been left for at least one hour to penetrate a smooth (honed / polished / antiqued) surface, a squeegee can be used to speedily remove the bulk of the product residue. Then, the small amount of remaining excess product / residue can be easily polished off with dry absorbent cloths. If the META CRÈME™ residue has begun to dry and cannot be polished off with a dry cloth, the cloth can be moistened with a small amount of META CREME™ to aid removal.

ON HIGHLY POROUS MATERIALS
Highly porous / absorbent surfaces, such as sandstone and soft varieties of limestone should be pre-sealed before applying META CRÈME™. Newly laid floors should also be pre-sealed prior to grouting, so that the grout is easy to remove and does not cause stains. Once the grout is dry and all grout haze has been thoroughly removed, META CRÈME™ can be applied over the tiles and grout.

ON ROUGH SURFACES
On rough surfaces, globules of META CRÈME™ may collect in gaps and pits. Use a paint brush to remove these globules and spread them out.

Dry-Treat recommends these applications rates for META CRÈME:

View the rest of the Dry-Treat products that we carry here.

Ready to give the amazing protective qualities of META CRÈME a try? Contact our experienced sales team at 800-220-1966 or email us through this page. We’re happy to help with any questions you might have about your order!