Description
Plexus H4110 is an elastic semi-structural two-part hybrid adhesive that forms elastic connections to a variety of substrates and allows for joint movement. It is designed for bonding composites (FRP, Epoxy, etc.) thermoplastics, metals, wood, concrete, and cement. Eliminating primer and activator steps, reliance on moisture and ensures consistent cure speeds and Low/no shrinkage and exotherm results no print through. Combined at a 1:1 ratio, H4110 has a working time of 8 to 12 minutes. Produt has a low odor. Plexus H110 is supplied in a ready-to-use and 400ml cartridge or 40 gal drum to be dispensed as a non-sagging gel.
Key Substrates
- Composites DCPD, Gelcoat, Phenolics, Epoxy based composites, RIM
- Coated Metals Powder coated or E-Coated metals
- Raw metals Aluminum, Stainless Steel, Raw Steel, etc.
Key Features
- Excellent environmental resistance
- Elastic bonding
- Excellent gap filling and thixotropic
- Easy to use 1:1 ratio
- Low print, low exotherm and low shrink
Properties
- Lap Shear: 725psi (5 MPa)
- Adhesive A: 60,000 cP
- Activator B: 60,000 cP
- Working Times: 8-12 Min.
- Fixture Times: 65 -75 Min.
- Tensile Strength: 950 psi ( 6.5 MPa)
- Tensile Elongation: 150 %
Reviews
There are no reviews yet.