Description
Pacer Technology General Purpose Grade E Series Cyanoacrylates are part of the original family of instant adhesives formulated to quickly bond plastics, rubber, metal and ceramic. These adhesives offer excellent strength characteristics and are available in five viscosities, from water-thin to a honey-like consistency, suitable for dispensing from the bottle or through automatic equipment.
- MEDIUM CURE: Broad use adhesive
- 100cP viscosity allows up to .005″ gap fill capability
- Meets MIL-A-46050C Type II, Class 2
Liquid State:
| Base Chemical | Ethyl Cyanoacrylate |
| Color | Clear Transparent Liquid |
| Flashpoint | 185F / 85C |
| Viscosity, cP | 80-120 |
| Typical Gap, inches | .005 |
| Vapor Pressure, mm Hg @70C | 10 |
| Specific Gravity, @25F/-4C | 1.08 |
| Refractive Index, n20C/D +/-.03 | 1.45 |
| Solubility Parameter | 10.7 |
| Soluble in: | Pacer X-9 Debonder, Acetone, MEK, Nitromethane |
Cured State:
<td data-sheets-value=”{“1″:2,”2”:”<2
| Boiling Point | 365F/185C |
| Softening Point | 306F/153C |
| Heat Distortion | 250F/121C |
| Glass Transition | 342F/172C |
| Volume Shrinkage, % | 13 |
| Rockwell Hardness, M | 74 |
| Cured Temperature Range | -65F to +180F (-54C to +82C) |
| Outgassing, 10^-6 mmHg, 72F | 0 |
| Elongation, % | |
| Dielectric Constant, 1 mhz | 3.89 |
| Volume Resistivity, ohm-cm (x10^12) | 8.5 |
Strength Data:
| Impact, ft-lbs, ASTM-950 | 3-5 |
| Tensile, steel, psi, ASTM-D2095 | 4000 (±10%) |
| Tensile Shear, psi, ASTM-D1002 | |
| Steel | 2400 (±10%) |
| Aluminum | 1600 (±10%) |
| ABS | SF* |
| Nylon | SF* |
| Rigid PVC | SF* |
| SBR | SF* |
| EPDM | 100 (±10%) |
*substrate failure (adhesive bond stronger than substrate)
Reviews
There are no reviews yet.