Description
LORD® 459T adhesion enhancer/surface modifier is designed for promoting adhesion to thermoplastic elastomers (TPE), thermoplastic polyolefins (TPO) and EPDM. LORD 459T adhesion enhancer/surface modifier is in toluene solvent, diluted for direct application.
LORD 459T adhesion enhancer/surface modifier can be used in conjunction with LORD acrylic adhesives, urethane adhesives and epoxy structural adhesives, as well as with a variety of double-sided tapes.
Shelf Life
Shelf life is six months from date of shipment when stored at 70-80°F (21-27°C) in original, unopened container.
Features and Benefits
• Versatile – enhances adhesion to difficult-to-bond elastomers, increasing the adhesion of coatings, double-sided tape and adhesives.
• Easy to Apply – low viscosity allows for easy application; no mixing required.
• Convenient – requires very low dry film weights to enhance adhesion to coatings and double-sided tapes.
Description
LORD® 459T adhesion enhancer/surface modifier is designed for promoting adhesion to thermoplastic elastomers (TPE), thermoplastic polyolefins (TPO) and EPDM.
LORD 459T adhesion enhancer/surface modifier is in toluene solvent, diluted for direct application. LORD 459T adhesion enhancer/surface modifier can be used in conjunction with LORD acrylic adhesives, urethane adhesives and epoxy structural adhesives, as well as with a variety of double-sided tapes.
Features and Benefits
Versatile – enhances adhesion to difficult-to-bond elastomers, increasing the adhesion of coatings, double-sided tape and adhesives.
Easy to Apply – low viscosity allows for easy application; no mixing required.
Convenient – requires very low dry film weights to enhance adhesion to coatings and double-sided tapes
| Appearance | Straw Yellow Liquid |
| Viscosity, cP @ 77°F (25°C) | 1-15 |
| Density lb/gal (kg/m3) | 7.2-7.35 (863-881) |
| Solids Content by Weight, % | 4.0-5.25 |
| Flash Point (Seta), °F (°C) | 48 (9) |
| Solvents | Toluene |
Reviews
There are no reviews yet.