Description
H2O AquaBonder underwater glue is a toughened structural adhesive used to bond to ABC plastic, fiberglass, and PVC. Our H2O glue is perfect for repairing pipes, skimmers, and main drains.
Bonds To: PVC, Fiberglass, ABS, FRT, PBT, PPO, PCBB, Metton®, Lomod®, Valox®, Noryl®, GTX, Minlon®, epoxy, RIM urethane, wood, poorly prepared surfaces, and where outdoor weathering or solvent exposure is anticipated.
Product Features:
- Minimal surface preparation
- Room temperature cure
- 1:1 mix ratio
- Rapid fixture in thin set
- Non-sagging formula
Application Instructions:
- Apply mixed product directly to one surface in an even film or as a bead.
- Assemble with mating part within recommended working time.
- Apply firm pressure between mating parts to minimize any gap and ensure good contact, (a small fillet of product should flow out the edges to display adequate gap.)
- Bond line thickness of mixed adhesive should be at .015″-.030″ for optimum adhesion.
Uncured Phyical Properties:
| Color | Off-White/Straw |
| Working Time | 4-6 min. @ 72°F, 22°C |
| Fixture Time | 10-15 min.@72°F, 22°C |
| Functional Cure | 45-60 min.@72°F, 22°C |
| Full Cure | 24 hours |
| Flashpoint | 51°F |
| Mix Ratio by Weight/Volume | 1:1 |
| Mixed Density | 8.20lbs./gal. / .98gm/cc |
| Mixed Viscosity | 50,000 cps |
Cured Physical Properties (7 Days @ 72°F):
| AdhesiveTensile Lap Shear[ABS] | 1,300 psi |
| AdhesiveTensile Lap Shear[GBS] | 3,500 psi |
| AdhesiveTensile Lap Shear[Polycarb] | 1,400 psi |
| Gap Fill | 0.125 in. |
| Impact Resistance | 22 ft.lb./in^2 |
| Service Temperature | -67°F to 250°F |
| Shore Hardness | 78 Shore D |
| Solids by Volume | 100 |
| Specific Volume | 28.1 in^3/lb |
| Tensile Elongation % | 15-25% |
| Tpeel | 35-40 psi |
Reviews
There are no reviews yet.