Description
The ChemSet H2O Kit #2 Caulk Gun Adapter Kit contains everything you need to begin using our H2O Aquabonder Glue for small one-time use. See H2O-KIT1 for Professional Use. Each kit contains a DK117 Caulk Gun Adapter along with (2) 50 ml cartridges of our H2O Aquabonder Underwater Adhesive as well as (10) Extra Mixing Nozzles. Our DK117 Caulk Gun Adapter will fit into any standard caulk gun so there is no need to purchase a separate more expensive dispense gun!
Each Kit Contains:
- (2) tubes of H2o Aquabonder 50 mL
- (1) DK117 Caulk Gun Adapter
- (10) Extra Mixing Nozzles
H2O Underwater Glue is a toughened structural adhesive used to bond to ABC Plastic, Fiberglass and PVC. The H2O Glue is perfect for repairing pipes, skimmers and main drains.
Bonds To: PVC, Fiberglass, ABS, FRT, PBT, PPO, PCBB, Metton®, Lomod®, Valox®, Noryl®, GTX, Minlon®, epoxy, RIM urethane,wood, poorly prepared surfaces, and where outdoor weathering or solvent exposure is anticipated
Product Features:
- Minimal surface preparation
- Room temperature cure
- 1:1mix ratio
- Rapid fixture in thin set
- Non-sagging formula
- Apply mixed product directly to one surface in an even film or as a bead.
- Assemble with mating part within recommended working time.
- Apply firm pressure between mating parts to minimize any gap and ensure good contact, (a small fillet of product should flow out the edges to display adequate gap.)
- Bond line thickness of mixed adhesive should be @ .015″-.030″ for optimum adhesion
| Color | Off-White/Straw |
| Working Time | 4-6 min. @ 72°F, 22°C |
| Fixture Time | 10-15 min.@72°F, 22°C |
| Functional Cure | 45-60 min.@72°F, 22°C |
| Full Cure | 24 hours |
| Flashpoint | 51°F |
| Mix Ratio by Weight/Volume | 1:1 |
| Mixed Density | 8.20lbs./gal. / .98gm/cc |
| Mixed Viscosity | 50,000 cps |
| AdhesiveTensile Lap Shear[ABS] | 1,300 psi |
| AdhesiveTensile Lap Shear[GBS] | 3,500 psi |
| AdhesiveTensile Lap Shear[Polycarb] | 1,400 psi |
| Gap Fill | 0.125 in. |
| Impact Resistance | 22 ft.lb./in^2 |
| Service Temperature | -67°F to 250°F |
| Shore Hardness | 78 Shore D |
| Solids by Volume | 100 |
| Specific Volume | 28.1 in^3/lb |
| Tensile Elongation % | 15-25% |
| Tpeel | 35-40 psi |
Reviews
There are no reviews yet.