Description
The TS250 dispenses low, medium, and high-viscosity fluids accurately and consistently. The TS250/255 Series is immediately usable anywhere in the world with its accompanying tools, accessories, and universal power supply.
The modern-style enclosure has a small footprint and conserves workspace through exterior design that allows multiple units to be stacked and fastened on top of each other. A highly responsive air pressure and vacuum management system, coupled with a digital timing circuit, Provides consistent and repeatable fluid dispensing and material waste control. User-friendly firmware provides a quick and easy setup function. Two operating pressures are available: 1 -100psi (0.07 – 6.9bar) for general applications, and 0 – 15psi (0.07 – 1.0bar) for specific low-viscosity applications.
Specifications
| Cycle Rate: | 600 cycles/minute |
| Timing Range: | 0.020 – 60.000 seconds |
| Timing Repeat Tolerance: | +/- 0.001% |
| Input Pressure: | 100 psi (6.9bar) maximum |
| Operating Pressure TS255: | 1 – 100psi (0.07 – 6.9bar) |
| Dispense Modes: | Timed and Purge |
| Meets or Exceeds: | CE, TUV-GS and NRTL |
Features and Benefits
- Universal power supply with snap-on plug for worldwide use
- User Friendly firmware provides easy setup task
- Digital timing from 0.020-60.000 seconds
- +/- 0.001% Timing repeat tolerances
- Adjustable vacuum-driven ”suck back” to control material ”tailing” and waste
- Stable to conserve work space when multiple TS250 units are used together
- Large, clearly marked air pressure and vacuum control knobs
- Precise, finely scaled air pressure gauges
- High visibility, 16 x 2 LCD display panel with back lighting
- Accessories included: Universal power adapter, foot switch, syringe barrel stand, 10cc receiver head, air hose with fittings, cable holder and sample dispensing tips.
Product Comprises of:
- Foot Switch
- Power Supply
- Sample Tip Kit
- 10cc Receiver Head Kit
- Mounting Brackets
- Receiver Head Air Hose Holder
- Syringe Barrel StandPlease
Note: The TSD800-6 air filter (not included) must be installed with the dispenser to ensure proper air filtration. Please remember to purchase a TSD800-6 air filter together with the dispenser.
Used to Dispense
- Activators
- Adhesive Pastes
- Alcohol
- Anaerobics
- Conformal Coatings
- Cyanoacrylates
- Epoxies
- Greases
- Inks
- Solder Pastes
- UV Cure Adhesive (Gels)
- UV Cure Adhesive (Liquid)
Applications
- Beads
- Lines and Beads
- Medical Device
- Potting and Encapsulating
- Product Assembly
Reviews
There are no reviews yet.