Albion 80oz Gun w/ Metal Nozzle

Description

Manual:

• Our largest capacity Standard-Thrust bulk gun.
• Great for standard viscosity to thick materials.
• Steel Barrel 18″ long x 3-3/8″ diameter.
• Includes 1 metal nozzle, 3/4″ ID steel 32-35
• If plastic cone nozzles are preferred, choose model 103-16 instead.
  • To using plastic cone nozzles 235-3 or 935-3 on this gun, substitute the front cap with 187-G05 barrel reducer and add a 421-G01 Ring Cap.
  • To use smaller ID metal nozzles, add Thread Adapter 27-6 to fit 32-series standard metal nozzles to the existing 221-G01 Front Cap.

Cordless:

• Our largest capacity cordless bulk gun.
• Great for standard viscosity to thick materials
• Steel Barrel 18″ long x 3-3/8″ diameter.
• Includes 1 metal nozzle, 3/4″ ID steel 32-35
• If plastic cone nozzles are preferred, choose model 103-16E instead.
  • To use plastic cone nozzles 235-3 or 935-3 on this gun, substitute the 187-G05 barrel reducer and add a 421-G01 Ring Cap
  • To use smaller ID metal nozzles, add Thread Adapter #27-6 to fit 32-series standard metal nozzles to the existing #221-G01 Front Cap.

• Speed – 35 seconds to dispense entire load at full speed
• Power – 3 times the thrust of a standard manual drive
• Flow control – instant drive disengagement
• Ergonomic design – reduces wrist strain
• Dispensing control – adjustable trigger speed
• Duration – up to 25 loads on one charge. This number will vary based on material viscosity.
• Full assembly – ready to go right out of the box
• Includes: 18 Volt Lithium-Ion battery and Fast 30 minute charger

Pneumatic:

• Our largest capacity Air-Powered bulk gun.
• Manual pull allows user better loading sensitivity to ensure complete loading.
• Optional regulator enables better flow control.
• Steel Barrel 18″ long x 3-3/8″ diameter.
• May also be used to convert any manual twin-cartridge extension gun (B26T600XL, B26T1500XL, etc.) to air powered dispensing.
• Includes: 1 metal nozzle, 3/4″ ID steel 32-35.
• If plastic cone nozzles are preferred, choose model 200-7 instead.
  • To use plastic cone nozzles 235-3 or 935-3 on this gun, substitute the front cap with 187-G05 barrel reducer and add a 421-G01 Ring Cap.
  • To use smaller ID metal nozzles, add Thread Adapter #27-6 to fit 32-series standard metal nozzles to the existing #221-G01 Front Cap.