Description
Tough castable, non-shrinking, medium viscosity, urethane compound for part encapsulation, rugged, flexible molds and patterns, holding fixtures and forming die pads can be used to form equipment linings that are abrasive-resistant and noise reducing.
KEY FEATURES
• Two-component compound easy to mix and pour
• Cures at room temperature to a semi-rigid rubber material
• Makes precision molds that faithfully reproduce detail
• Returns to its original shape after 350% elongation
• Ten-hour demolding time
Listed under NSN#8030-00-144-9756
Intended uses
Reproduce low- to medium-volume or discontinued rubber parts; form flexible molds and nonscratching holding fixtures/linings; encapsulate wire and electronics subject to impact, vibration, expansion, and contraction
Applications:
Pads for press brake forming
Lines process equipment to dampen noise
Protect equipment surfaces from wear and corrosion
Pouring concrete expansion joints
Casting flexible parts and molds
Physical Properties:
Cured 7 days @ 75° F
| Color: | Black |
| Coverage/lb. : | 106 Sq. in./lb. @ 1/4″ |
| Cured Hardness:
|
87A |
| Dielectric Strength: | 350 Volts/mils |
| Functional Cure: | 16 Hrs. |
| Maximum Elongation: | 650% |
| Mix Ratio: | 77 Resin; 23 Curing Agent/WT |
| Mixed Viscosity: | 10,000 cps |
| Tensile Strength: | 2,100 psi |
Reviews
There are no reviews yet.