Description
Tough fast curing structural adhesive that requires minimal surface preparation and is a non sag, room temperature curing with superior impact and peel resistance to most plastic surfaces such as ABS PVC, SMC, composites polyesters, polycarbonate, strenics, PET, fiberglass wood, concrete, ceramic and metal.
KEY FEATURES
• Requires minimal surface preparation
• Bonds dissimilar substrates as well as unprepared metals, ceramics, wood, and standard engineered plastics
• Functional cure in 1 hour
• Final bond resistant to weathering, humidity, and wide variations of temperature
• 1:1 formula for easy dispensing
• Creamy consistency with good gap filling capabilites
Intended uses
Bonds PVC, fiberglass, ABS, FRT, PBT, PPO, PCBB, Metton®, Lomod®, Valox®, Noryl®, GTX, Minlon®, epoxy, RIM urethane, wood, poorly prepared surfaces, and where outdoor weathering or solvent exposure is anticipated.
Physical Properties:
| Color: | Straw |
| Mixed Viscosity: | 50,000 cps |
| Mix Ratio by Volume/WT: | 1:1 |
| Flash Point: | 51 ̊F |
| Mixed Density: | 8.20 lbs./gal/.98 gm/cc |
| Working Time: | 4-6 minutes @ 72 ̊ F |
| Fixture Time: | 10-15 min. @ 72 ̊ F |
| Functional Cure: | ¾ – 1 hr. |
| Full Cure: | 24 hrs. |
Reviews
There are no reviews yet.